The Stat Fax 3300+ semi-automatic clinical biochemistry analyser is designed for preparing, reading and interpreting biochemistry test results. The apparatus has a built-in incubator and reading position. Samples are read using a bichromatic optical system with 6 filters. The instrument software contains pre-programmed calculations for end-point and kinetic determinations.
Measurement linearity: between -0.20 and 2.50 A (absorbance units)
Wavelengths of optical filters: 340, 405, 505, 545, 580 and 630 nm + two optional
Light source: halogen bulb with protection system
Dry thermostat: with 12 positions, at 37°C for F 12 mm tubes
Printer: thermal, 20 characters per line including graphics
Display: 240 x 128 pixels with graphics capability
Keypad: 16 membrane keys with audible confirmation
Processing capability: reads, calculates and prints results in 3 sec/tube.
Calculation mode: the machine can be programmed for the following types of analysis:
-end-point with standard or factor, multi-standard
-percentage or absolute standard
-kinetic (in pack or single) with standard or factor
Memory: permanent, possibility to store up to 100 tests with all working parameters, calculations, linearity and normality ranges, standard values, calibration curves.
Minimum measurable volume: - 1ml in F 12 mm tube
- 0.250 ml with absorbent cuvette system
- 0,400 ml in cuvette
The analyser works in open system : any analysis can be programmed with any reagents, which can be read at (or close to) the wavelengths mentioned. The instrument can optionally be supplied with a Mosquito absorbent cuvette system, which reduces the reagent consumption, used for one determination, up to 500 m l/analysis.
Features of the Mosquito absorbent cuvette system :
Minimum aspirated volume : 250 ul at 7" vacuum
Optional suction volumes : 300, 350, 400, 450 and 500 ul
Translated with www.DeepL.com/Translator (free version)